Over the years we've made a number of Manfrotto® RC2 compatible plates for Capture. This article goes through the compatibility ratings of each plate, starting with the current model.
When we talk about "RC2" compatibility, we're referring to Manfrotto® brand tripod heads with a model number ending in RC2. When we say our plates are "RC2 compatible" we mean you'll be able to take your camera out of Capture and put it directly into your RC2 tripod head, no disassembly necessary.
Dual Plate (current)
If you have the new Dual Plate (launched in Dec. 2017), your plate will work with most Manfrotto RC2 style tripod heads. Check the chart below for reference.
If you find an RC2 model that doesn't work with your new Dual Plate, contact us.
The PROplate was discontinued in late 2017. The PROplate achieved RC2 compatibility via a set of removable adapters that bolted into either side of the plate. With these adapters, PROplate works with most, but not all RC2 tripods. See below for a list of compatible models. Even if you have an incompatible model, there's a chance we might have special adapters we can send you. Look at the chart below. If it says "Request Adapter" then contact us, provide your shipping address, and request a set of Type B adapters for PROplate. We'll send 'em for free, because we're cool like that.
PROplate RC2 Compatibility Chart*
|Manfrotto® Model||Compatible with PD plates?||Description of Tripod Head Model|
|3030||Request Adapter||repl 804RC2 - Basic 3-Way Head with RC2 Rapid Connect Plate (3157N)|
|3130||Request Adapter||Replaced by: 128RC - Micro Fluid Head W/ Rc2 Rapid Connect Plate 200Pl-14 (3157N)|
|3229||Yes||Replaced by: 234RC2 - Swivel Tilt Head With Rc2 Rapid Connect Plate (3157N)|
|3265||Yes||Replaced by: 222 - Grip Action Ball Head With Rc2 Rapid Connect Plate (3157N)|
|3299||Yes||Replaced by: 323 - Rc2 Rapid Connect Adapter With 3157N Plate|
|3437||Request Adapter||Replaced by: 460MG - 460 3D Magnesium Head With Rc2 Rapid Connect Plate (3157N)|
|128RC||Request Adapter||Micro Fluid Video Head with Quick Release Camera Plate|
|143RC||Yes||Magic Arm with Quick Release Plate|
|155RC||Yes||Tilt-Top Head with Quick Plate|
|234RC||Yes||Monopod Tilt Top-Swivel Tilt Head with RC Plate 200PL-14|
|244RC||Yes||Variable Friction Magic Arm Quick Release|
|3130G||Request Adapter||Green Micro Fluid Head with RC2 Rapid Connect Plate (3157N)|
|3157AN||Request Adapter||Replaced by: 200PL-38 - Rc2 Rapid Connect Mounting Plate With 3/8" Screw|
|322RC2||Yes||Horizontal Grip Action Ball Head with RC2 Rapid Connect|
|324RC2||Yes||Light Duty Grip Ball Head|
|3265G||Yes||Green Grip Action Ball Head with RC2 Rapid Connect Plate (3157N)|
|327RC2||Request Adapter||Light Duty Grip Ball Head|
|390RC2||Request Adapter||Replaced by: 391RC2 - 390RC2 Junior Head With RC2 Rapid Connect Plate 200PL-14|
|391RC2||Request Adapter||3-Way Aluminum Photo Video Head with QR 200PL-14 Plate|
|460MG||(Yes) Request Adapter||3D Magnesium Head with RC2 Quick Release - Confirmed to work with the Beta adapter|
|468MGRC2||Yes||Hydrostatic Ball Head with RC2 Quick Release|
|468RC2||Yes||Replaced by 468MGRC2|
|484RC2||Yes||Replaced by: 494RC2 Mini Ball Head With RC2 Plate(200Pl-14- Holds 8.8 lbs.(4Kg)|
|486RC2||Yes||Replaced by: 496RC2 Compact Ball Head With RC2 Plate(200Pl-14)- Holds 13.2lbs.|
|488RC2||Yes||Replaced by: 498RC2 Midi Ball Head With Rc2 Plate(200Pl-14)-Holds 17.6lbs.(8kg)|
|494RC2||Yes||Mini Ball Head with RC2|
|496RC2||Yes||Compact Ball Head with RC2 Quick Release|
|498RC2||Yes||Midi Ball Head with RC2 Quick Release|
|700RC2||Request Adapter||Composite Video Head|
|700RC2NAT||Request Adapter||Green Mini Video Head with RC2 Rapid Connect Plate (3157N)|
|701RC2||Request Adapter||Mini Video Head W/Rapid Connect 200Pl-14 Plate|
|804RC2||Request Adapter||Basic Pan Tilt Head with RC2 Quick Release|
|MH054M0-Q2||Request Adapter||054 Magnesium Ball Head with Q2 Quick Release|
|MH055M0-Q2||Request Adapter||055 Magnesium Ball Head with Q2 Quick Release|
|MH293D3-Q2||Request Adapter||FOLDABLE 3-WAY HEAD - 290 SER.|
|MHXPRO-2W||Request Adapter||XPRO FLUID HEAD|
|MHXPRO-3W||Request Adapter||XPRO 3-Way Head w/Q2 Quick Release|
|MHXPRO-BHQ6||Yes ARCA||MHXPRO-BHQ6 XPro Ballhead with Top Plate (ARCA compatible no adapters required)|
|MVM450A||Request Adapter||FLUID HEAD|
|MKCOMPACTADV||Request Adapter||Compact Advanced aluminium tripod with 3-way head|
|MKCOMPACTLT||No||Compact Light aluminium tripod with ball head|
|NGEH1||Yes||Expedition Ball Head With Rc2 Rapid Connect Plate (3157N)|
|BeFree MKBFRA4||Yes||BeFree Compact Travel Tripod (uses a 200LT-PL Compatible clamp)|
|No||BeFree LIVE Fluid Head uses the incompatible 501PL Plate.|
*We try to keep this list as updated as possible, but note that this may not be a complete list.
Again, if you see "Request Adapter" next to your tripod model, contact us and provide your shipping address.
Original DUALplate (discontinued)
The original DUALplate was discontinued around 2015. It worked with Type A RC2 tripod heads, but not with most type B heads. See the compatibility list above.
Why the inconsistency?
Not all tripod heads labeled RC2 are exactly the same. There are actually 2 distinct types of them, but since Manfrotto® does not officially designate between them, we'll just call them Type A and Type B. Type A is compatible with PROplate, type B is not. Here's the difference (note that these observations are from our perspective and not official classifications from Manfrotto®):
Type A heads grab the plate in 2 places: the locking cam lever, and directly across from the cam lever. These heads almost always take our DUALplate and PROplate perfectly. These heads make up about 80% of the total Manfrotto heads on the market, and are typically designed for still photography (as opposed to video).
Type B heads grab the plate in 3 places: the locking cam lever, and the 2 corners of the plate opposite of the cam lever. These heads typically do not fit our DUALplate or PROplate. We believe these heads are a minority of the Manfrotto heads on the market, and they are typically designed for video purposes.
So why couldn't we make a plate that works with both Type A and Type B? It boils down to a geometry problem. To make our plates compatible with Capture, their geometry must be within a certain set of tolerances. To make plates compatible with an RC2 tripod, their geometry must be within a different set of tolerances. To make plates compatible with both, there is a very tiny window of tolerances we must meet. Type B heads are a slightly different geometry than Type A heads, and are outside of our tolerances. We physically cannot make a tripod plate that is compatible with Capture and Type B heads.
I bought Capture to specifically work with my RC2 head, and it doesn't. What now?
First off, we sincerely apologize if you feel like you were misinformed or misled regarding our RC2 compatibility. Whenever we talk about RC2 compatibility we try to emphasize compatibility with most and not all models. In any case, it's a complex point to get across (hence this help article) and we do realize that some folks out there will order from us with different expectations. We stand fully behind our gear and our service, and we still believe you can get great use out of your CapturePRO system. Here are the options we recommend:
Arca Adapter: You can cheaply and easily get an ARCA adapter for your tripod head. See instructions on how to do this here.
New RC2 Head: If you're a diehard Manfrotto user you can always replace your current head with one of many compatible RC2 heads. This may be a less cheap option, but if you're already looking to upgrade or replace your tripod head it's a great solution.
Return Your Capture: If you've got an incompatible Manfrotto head and none of the above solutions work for you, we still think CapturePRO is a great product that will give you many years of hands free, uber-secure camera-carrying goodness. But, if a lack of compatibility with your RC2 model is a deal-breaker, you can contact us and request a money-back return.